How to Avoid Motorcycle Crashes in Traffic

6:18 AM


People who ride their motorcycles look cool. They seem to have a lot of fun too. Aside from the appealing bikes, many love motorcycles because they are cheaper and they can get you to your destination faster. However, riding motorcycles can also cause a lot of trouble. You are putting yourself at risk every time you get on your bike.


The danger is always there no matter how familiar you are with the street. Even if you have been taking this road every weekend, you cannot be too complacent. Even riders who use their bikes everyday encounter accidents.


You can do several things to ensure your safety on your trip. You can check your machine before you leave. Make sure that the tires have the right air pressure. The controls should be working well too. In addition, you should see to it that the lights are working properly. Check the oil levels too. In addition, make sure that the chassis and stands are in top shape.


Aside from checking the bike before you ride, you should also wear the right gears. Strap in those motorcycle riding gloves. Wear your helmet properly as well. It has to fit your head perfectly. The same goes for your jacket and boots. This is not only for protection but for comfort as well.


Here are some other safety tips you should take when riding:


1. Familiarize your motorcycle. Although it is exciting to have a brand new motorcycle, it can be risky to take it on the road right away. Familiarize its features. The new bike has new aspects and its limitation is different from the one you are so used in riding. Take time to get to know your motorcycle better.


2. Eyes on the road and always look ahead. Several things on the road can catch your attention. This can alter your focus. You cannot afford to do this when you are on a motorcycle. Some may think that they know the road too well. However, dirt and logs could block the road and you will not be able to avoid that if you are not looking.


3. Be visible to other motorist. Do not stay on the blind spot. It is very dangerous for you if the other drivers cannot see you. This can lead to a crash and serious accidents. Before you leave, you have to see to it that your lights are working. Wear reflective materials as well.


4. Follow road signs and traffic rules. The signs are there to warn you. Do not ignore them. There could be portions of the road under repair. Follow traffic rules too. Always observe the speed limit and attempt to beat the red light.


5. Do not tailgate other vehicles. This is very dangerous especially if the vehicle in front of you suddenly stops.


Aside from wearing the right motorcycle riding gloves, and the rest of the gears, you also have to know how to stay safe while you are on the road. Keep in mind of the things you should and should not do.

Author: Jenny Carson

About the author:
For more tips and information about motorcycle riding gloves, please check out http://www.rockytopleather.com/categories/gloves.


Article source: Free Motorcycles Articles.



Read On 0 comments

Riding Precautions - Simple Tips on How to Keep It Safe When Riding a Motorcycle

6:17 AM


All sorts of vehicle can get into a bad accident when not used with caution. People can get hurt in the process. Many people have lost their lives in these cases. Some of them survive while others suffer a long time of disability. You see these cases happen from people who own cars and trucks. They have solid exteriors that can lessen the impact of the bumps before it gets to the driver. However, have you ever considered how big the impact is if you were only riding a motorcycle?


It is no doubt that any biker can be hurt twice as more as those who gets in an accident with a four-wheel vehicle. You can be thrown off easily when you get hit by another vehicle. You can easily injure yourself, even if you fall off from your bike. Bikers can be at risk for accidents especially at night as these vehicles are low in visibility. To get into lesser accidents, here are some tips that you should be following:


� Make sure all parts of your motorcycle are in a good working condition. When you hear unusual sounds coming out from it, trace it right away or have them checked


� Make sure you wear the right protective clothing and the right motorcycle riding gloves and apparel at all times. Make sure it is appropriate for whatever time or season.


� Always practice defensive driving at all times. Never play chicken or challenge other vehicles. Learn to give way and take turns.


� Be seen at all times. Never forget to use your lights at nighttime or on dim days. Make sure you bikes have reflectors on it.


� Obey traffic rules at all times. Never be too complacent that you can get away breaking the law because you are riding a fast car. You may outrun the law enforcers but you can never outrun accidents.


� Focus on your driving and not on other things. Riding a motorcycle requires many things from a driver. One of which is the ability to balance the bike at the same time minding the other vehicles. It can even be tripled when you have a passenger with you. Therefore, save your other thoughts for later and put your head on the road where it should be.


� Always be ready to face the challenges of the road. Be prepared by being informed at all times. Listen to the news on where the heavy traffic could be, as well as the weather forecast. This can also give you an idea what other protective clothing you need to bring, as well as change your motorcycle riding gloves to a more appropriate one.


� Never take a passenger with you if you still do not feel comfortable riding the bike. Do not be a show-off. If in case, you somewhat feel comfortable taking another person for a ride, please drive slowly and carefully.


� Use signal lights appropriately. Blow your horn when it is needed. These are other ways to make your vehicle even more visible to avoid accidents.

Author: Jenny Carson

About the author:
For more tips and information about motorcycle riding gloves, please check out http://www.rockytopleather.com/categories/gloves.


Article source: Free Motorcycles Articles.



Read On 0 comments

What You Should Check before Going to a Motorcycle Trip

6:17 AM


Motorcycle trips are exciting. It is easy to get to a certain place. Aside from that, you can enjoy the view. You can easily stop to enjoy it as well. However, these types of trips need extensive planning. You have to plan where to go, what to do and what to bring.


You have to do several things before you leave. Here is a checklist to help you.


1. Prepare your motorcycle gears. The gears are very important. See to it that they are complete and in top shape. Although helmets are the most important gears, you should not take the other safety devices for granted. Gears like the gauntlet motorcycle gloves and leather motorcycle jackets are very important too. The same thing is true with your travel suit, eye gear, and boots.


2. Check your motorcycle. This is a very important step. Check your tires and see to it that it has the right air pressure. Verify the controls as well. It is important that the handles, brakes, throttle, and the like are responsive. They should not be loose. Test it before you leave. Lights are very important too. See to it that all lights are working. You should also have enough oils on the machine. Moreover, check the other features as well like the rest of the chassis and the stand.


3. Study the way to get to your destination. It is always important to check out your route before you leave. This will help you anticipate some problems along the way. You can also prepare for it. Aside from that, you can check if there are short cuts or beautiful spots, you can check out along the way. Knowing your way to your destination will make the trip more hassle free.


4. Pack the right stuff. You have a limited storage during motorcycle trips, so make sure that you prioritize. Do not overload because this can be a burden while on the trip. See to it that you bring with you the safety kit, repair kit, and the first aid kit. Bring along your necessities as well. Do not forget energy food and drinks to keep you up.


5. Prepare an itinerary. An itinerary is always great because you can get to the places you want to go. This will save you some time. If you have an itinerary, you will know what to bring. You will make the most out of your experience as well. Leaving a copy of your itinerary at home is also a safety precaution.


To ensure a fun and relaxing motorcycling get away, you have to plan your trip properly. You should not only think about one aspect of the motorcycle trip. If you forget to wear your gauntlet motorcycle gloves, the trip can be very straining and uncomfortable. This alone can change your entire experience. In order to have an enjoyable trip, plan it carefully and check everything you have to check. When you prepare for everything, you will not have to worry about anything while on the road.

Author: Jenny Carson

About the author:
For more tips and information about gauntlet motorcycle gloves, please check out http://www.outbackleather.com/classic-gauntlet-lined-gloves.html.


Article source: Free Motorcycles Articles.



Read On 0 comments

Harley Davidson Custom Fuel Tanks & Artwork

6:17 AM


Harley Davidson Custom Fuel Tanks &
Harley Davidson Custom Artwork are in
huge demand. Today it is not just enough
to have a Harley Davidson, Your Ride has
to be unique in any way You can make it.
Everyone now wants to stand out from the
crowd and have their Harley be a head turner.


Simply the best way to make Your ' Iron Horse '
Harley Davidson be a 100% guaranteed Unique
head turner is to apply custom fuel tank and
fender artwork. There is just no better way
to make Your Harley Davidson the absolute envy
of any enthusiast who lays their eyes on it !


Custom paint and airbrush artwork for your
Harley Davidson will make it a genuine Unique
' One-Off ' that ONLY You have on the face of
the planet.


However finding Great Top of the line Custom
Fuel Tank and Fender Artwork for Your Harley Davidson
is not easy these days. Well especially if You do not
know where to find experts who are willing to work.


You will NOT find anywhere on the net where You
can get Your hot little hands on the very best
custom Fuel Tank Artwork Today, that's Right, Today.


Well that place NOW exists.



Go Below and find NOTHING but The Very Best
Custom Fuel Tanks and Artwork for Your
Harley Davidson that You can have Today !!

Author: Tony Markx

About the author:
Here It Is Folks
http://www.squidoo.com/harleydavidsonusa

Article source: Free Motorcycles Articles.



Read On 0 comments

Ten Motorcycle Tourers

6:17 AM


Selecting a Tourer is a very personal thing, and I'm not saying that these ten machines are the best. Some may not be still in production, but they are all available, albeit second hand.




HONDA GOLDWING GL1800




The only bit of kit that Honda's Flagship is missing is an ashtray, and they're probably working on that at the moment. This bike has been around a long time in one guise or another, but you only have to see the number of owners clubs and members to realise that its popularity isn't waning yet. A high-tech aluminium chassis keeps the weight down, providing a surprising turn of speed. This is the ultimate tourer, but just too bulky looking for some people.




BMW K1200LT




Although still quite heavy, this bike is more economical than the Goldwing. Looking around, it seems to be one of the most popular tourers around and rightly so if it's power you want, but it needs a little care on the twisties. Newer models are fitted with a reverse gear.




HARLEY DAVIDSON ELECTRA GLIDE




It's big, it's brash and it's American. Definitely built for comfort, not speed, but will turn more heads than you can shake a stick at. 110mph from a 1449cc engine says it all. One of the advantages of owning this machine is the minimal depreciation, and you're always going have something to talk about to any passing stranger.




TRIUMPH TIGER TOURER




Oodles of acceleration, limited vibration and a truly versatile character. But having said that, if you're on the short side, forget it. Being a shorty myself, I think it's a shame that motorcycle manufacturers exclude a huge section of potential customers by having a high seat. However, the taller motorcyclists I know assure me that this is an exceptional bike. I'll just have to take their word for it.




HONDA ST1300 PAN EUROPEAN




This is one of the most silky, comfortable, fast machines you're ever likely to have the pleasure of putting your bum on. Even with two up it handles superbly. If you're thinking about buying a tourer, this has to be worth considering.




YAMAHA FJR1300




This shaft driven offering from Yamaha was specifically built with touring in mind. The huge capacity tank and hard luggage are just part of the deal. Loads of power from the reliable engine will get you out of trouble, but that doesn't mean it's thirsty. The FJR represents value for money and I like it.




MOTO GUZZI NORGE 1200




An excellent value for money, shaft driven bike from Moto Guzzi. With a range in the region of 200 miles and a comfortable riding position, this is a true tourer. Some harshly describe this as the poor man's BMW, but let's get one thing straight; it's shaft driven, but it's not a BMW.




TRIUMPH TROPHY 1200




Sadly discontinued in 2002, the Trophy is still worth considering if you can find a decent second hand model. It's a heavy bike, but it's much cheaper than say, the Pan's and you'll still be getting a lot of bike for your money. For such a big bike, the cornering capabilities and general handling are pretty good, and you could do far worse than go for one of these, especially if you are on a limited budget.




HONDA DEAUVILLE




This mid size tourer can turn its hand to anything; ideal for commuting on a daily basis and touring across Europe, and the 54 litres of colour coded luggage will help. Low service costs and insurance group make the Deauville very attractive. The build quality of this shaft driven machine is legendary, making it high on would be adventurers' short lists.




BMW R1200RT




A faster, lighter and much welcome successor to the R1150RT, this machine is not just a good tourer, it's a good bike. One nice innovation on this bike is the height adjustable seat (there I go again). The Telelever/Paralever suspension provides excellent handling as you would expect from a BMW. Expect to pay a decent price for a second hand one, as these bikes hold their money, but if it's in good condition you're going to be the owner one nice bike.




Well, there are ten bikes for you, and they all have something to offer whatever your circumstances. If your favourite was not included, I apologise.



Author: Alan Liptrot

About the author:
Alan Liptrot is the founder of Motorbike Tours.co.uk The Company offers guided motorcycle tours in Spain, Portugal and Morocco.

Article source: Free Motorcycles Articles.



Read On 0 comments

How to Learn to Ride a Motorcycle

6:17 AM


Before you dream of riding your motorcycle and showing off your ride, you have to understand several things first. Riding a motorcycle is not as easy as many think. It does not end when you learn how to control the machine. In fact, learning should not start there.


Learning how to ride is a step-by-step process. Before riding, you have to learn to give respect to the motorcycles. It means that you have to realize the risks involved when riding it. If you have the right attitude and approach to learning, you will have fun with your bike for a long time.


The most important thing that you should learn first is the different motorcycle safety gears you should always wear when riding motorcycle. If you do not know the danger of the activity, you will not wear your helmet, motorcycle outfit, leather motorcycle gloves, and motorcycle boots. This will not only put you at risk but the people around you as well.


Once you have the right stuff, it is time to get to know the motorcycle parts. You need to check these parts regularly. These include the tires and wheels, the controls, lights and batteries, oils and fuels, the chassis and suspensions, and the stands. These parts are essential for a smooth and safe road trip. You have to learn about their importance in order to stay committed in checking them.


After learning about the parts, it is time to learn how to get on the bike. You can use the following guidelines in learning to ride your dream motorcycle:


1. Learn how to get on the motorcycle. It is important that you practice on a motorcycle that you can handle since the ease of getting on it largely depends on your physical profile. Position yourself at the left side of the bike. Maintain a good balance as you swing your right foot over the motorcycle.


2. Acquaint yourself with the motorcycle and be comfortable. It feels very awkward to ride the motorcycle for the first time especially with big bikes. Familiarize the ergonomics as well as the feel of the different parts.


3. Learn the uses and location of the different controls. At the right side of the handle is the control for acceleration and for the front brakes. Your right foot on the other hand controls the back brakes. You will see the clutch at the left portion of the handle, next to the left hand grip.


4. Familiarize how to start the motorcycle. Most have a switch found in the right portion of the bike.


5. Retract the kickstand. Some bikes will not start if this is still down. Kick it up to start riding.


Learning the basics about riding motorcycles is just the beginning. You have to practice a lot and do not rush. Take it slow. You will be able to enjoy more rides if you are careful. Once you are comfortable with the bike, you can find the speed you are comfortable in riding. Most importantly, do not forget the safety gears. A pair of leather motorcycle gloves can make a huge difference.

Author: Jenny Carson

About the author:
For more tips and information about leather motorcycle gloves, please check out http://www.rockytopleather.com/categories/gloves.


Article source: Free Motorcycles Articles.



Read On 0 comments

Seven Steps to Shift Gears in Motorcycles

6:17 AM


Shifting gears is a very important command when motorcycling. It is necessary to change the speed of your motorcycle. Changing gears is not that easy though. However, a little practice will help you master it.


After preparing your motorcycle riding gloves and the rest of your gears, it is time to get to know your machine better. You have to know how to check your own motorcycle parts. Aside from learning how to check it, you have to know how to operate it as well. You will need to familiarize the different parts. This will make learning how to ride your motorcycle easier.


In order to learn how to shift gears, here are the steps you can follow:


1. Find out where the location of the shifter is. You will find it in the left side of the motorcycle. It is opposite to the foot brake of the bike. If you can find the lever for the clutch on the left handle, you will see the shifter on the foot peg at the left side.


2. Familiarize how many variations of gears your motorcycles have. Some have four or five. Others can have as much as six gears. You can change the gear by squeezing the clutch lever and clicking or choosing your desired gear. You can shift it to first, neutral, second and so forth.


3. Keep in mind that you cannot start your bike unless it is in neutral. Put your ignition on the start position. There are motorcycles that have electric start. The start button on these bikes is on the left handle. If your bikes do not have this, it has a kick start. Bikes with kick start provide a lever you can kick on the right side of your motorcycle next to your foot. You should not squeeze the clutch when starting.


4. After step three, it is time to turn your engine. Set your bike to move by squeezing the clutch and setting it to first gear. Hold down the clutch and do not release it. Slowly let it go as you give a small amount of gas to the motorcycle. Be patient with learning this. You cannot give it too much gas right away because you could lose control.


5. Once you have done this, study at what level will your motorcycle starts rolling. After getting to this level, give the bike more gas and let go of the clutch completely.


6. As you drive, remember to shift to second gear. You should not stay on the first gear for a long time. Again, this part takes a lot of practice. So take your time.


7. If you want to stop, shift to neutral or first gear as you are holding the clutch down.


Although the motorcycle riding gloves and the rest of the motorcycle gears are important to keep you safe, knowing how your machine works will definitely make everything run smoothly. However, you have to be patient. Familiarizing everything and mastering how to shift gear takes time.

Author: Jenny Carson

About the author:
For more tips and information about motorcycle riding gloves, please check out http://www.outbackleather.com/basic-riding-gloves.html.


Article source: Free Motorcycles Articles.



Read On 0 comments

Important Features Your Motorcycle Gears Should Have

6:17 AM


Riding your motorcycle is risky. You do not have anything that protects you. This is what separates it from other vehicles. You might ask why people love to get on these machines even if it puts them at risk. This is because of the freedom they experience when they are on the road.


Since this puts them at risk. It is important that they take precautionary measures. First, they have to check their motorcycles regularly especially before they go on a trip. They should see to it that the tires, controls, and the rest of the motorcycle parts are working properly. If they see any damage part, they should repair it immediately.


Aside from checking it properly, you should also invest in good set of motorcycle gears. If you are going to purchase a pair of gloves, choose the best gauntlet motorcycle gloves that you can find. Keep in mind that these gears should be able to protect you from the environmental elements when you ride.


To help you find the best gears, consider the following:


1. It has to serve its purpose. The main purpose of wearing safety gears is to keep you safe. It should do just that. You should pick a helmet that will protect your head. Wearing cheap helmets will not do this. Those made with cheap materials will break or slip if a crash occurs. The jackets made of fabric will not protect you during an accident as well. So make sure you use leather jackets or similar materials.


2. The gears should have high quality materials. The gears will not be able to deliver their purposes if they have cheap materials. In order to ensure high quality, purchase brands that withstand the test of time. You can also read reviews on the internet. Check what experts recommend but see and feel it for yourself.


3. It should not slip off easily. Some gears like your boots, gloves, and helmets can slip off. However, they should not. Your boots should stay on your feet to protect you during a crash. It should safeguard your feet as well as your ankle. Your gloves on the other hand should protect your hands and wrists.


4. It has to be sturdy and reliable. All motorcycle gears should be. Your helmet should be able to survive strong impacts and protect your head. Your boots on the other hand should be very useful when you put your motorcycle to stop. That is why you use motorcycle boots. The ordinary footwear can strain your feet during this activity.


5. It should be able to deal with the harsh environment. Another major reason why you need the gears is that you need something to combat the weather. Your gears should be water resistant when there is a rain. They should also keep you warm during the cold season.


It is important that you wear the best gears every time you ride your motorcycle. Aside from the gauntlet motorcycle gloves, you should also have a reliable helmet, comfortable leather jacket, sturdy pair of motorcycle boots, and riding suit to fit your travels.

Author: Jenny Carson

About the author:
For more tips and information about gauntlet motorcycle gloves, please check out http://www.rockytopleather.com/categories/gloves.


Article source: Free Motorcycles Articles.



Read On 0 comments

Motorcycle Luggage Saddlebags - Which is Right For You?

6:18 AM


Any person looking to travel on two wheels should consider the ultimate in motorcycle luggage: saddlebags. Unfortunately, most folks buy saddlebags that aren't in line with their lifestyle; they might be too large, too small, not secure enough, too secure, etc. Here are my recommendations on what to consider before you buy motorcycle saddlebags:


Are you planning on long term travel? This may be the most important question to ask. There are two main types of saddlebag: the throw over (which is removable) and the mount (which isn't). If you are going on tours for a week or more, mount saddlebags provide more security and less hassle. On the other hand, if you see yourself day tripping a lot, a throw over saddlebag will allow you to provide room for luggage should you need it, while also giving you the freedom to remove them at the drop of a hat.


Check for quality. Ensure that the frame will not stain easily (rust looks much worse on a motorcycle than it does on a car). Also, the saddlebags should fit tightly and securely around your bike; it's a real downer to stop every fifteen minutes and readjust your luggage.


Pretend your saddlebags are beds. The same logic applies to saddlebag shopping as mattress shopping: the firmer they are, the longer they will last. Over time saddlebags naturally sag (much like their riders), so it's best to buy a firm one and break it in. This will add years to the life of your saddlebags.


How good is the lock? I'm shocked at the number of folks who spend hundreds of dollars on the right helmet, and protect it with a five dollar lock. If you looking for the best way to carry motorcycle luggage, saddlebags are the way to go, but they are easy prey for theft if not locked properly.

Author: Adam Costa

About the author:
In conclusion, you can learn more about motorcycle luggage saddlebags and motorcycle tents at our website.

Article source: Free Motorcycles Articles.



Read On 0 comments

Wear Protective Motorcycle Gear for Your Safety

6:17 AM


Motorcycle riding is a dangerous sport yet even with this fact, a lot of people still indulge into it as a hobby, both men and women alike. To minimize the danger of riding a motorcycle, protective clothing has been made for the sole purpose of lessening the impacts of a possible crash. Women are thought to be delicate in nature that manufacturers made special motorcycle gears and apparels especially for women. Harley Davidson joined the bandwagon by creating a women's Harley Davidson boots line, which features motorcycle boots of various styles to encourage women to be safe on a motorcycle ride without sacrificing their fashion personality.


Other protective clothing includes the wearing of jackets, glove, trousers, and helmets. Jackets and trousers are both made from heavy weight and durable materials which are needed to cushion the impact of a crash. It also gives additional protection from the abrasion during a fall. Trousers also prevent the burning of the leg's skin when touched to the hot engine of the motorcycle. A new airbag technology has been introduced to fit jackets and vests for added protection. Leather is still the best material when these apparels are mentioned because it gives the greatest amount of protection from abrasion in comparison to other textiles.


Your feet also need the most protection it can get from the footwear that you don. Those from the women's Harley Davidson boots collection is a great choice of protective footwear. You might be surprised to find out that motorcycle boots are very much lightweight despite how they look. They are made very tough yet flexible to give a better grip to the rider. The soles of the boots are made up of stiff rubber and give great traction on both wet and dry surfaces. Make sure that the boots you wear on a motorcycle ride is actually a motorcycle boot and not just any other boot because it can be very dangerous not to do so. Motorcycle crashes involve leg injuries big time.


Likewise, you should give some attention to your hands and use gloves when going out for a ride. Gloves provide protection from abrasions. Further, it also gives you a better grip on the motorcycle especially on rocky roads or tough weather conditions. Usually, leather gloves are made with padding which supports the fingers and the wrists in the event of a crash.


Wearing of a helmet should not be forgotten because this is the most important motorcycle gear for your safety. The head is very vulnerable during a crash and it is the helmet's duty to protect it when one occurs. A blow to the head is very fatal and it is what a rider will experience when he figures himself in a crash, which is why the helmet is very important.


Before going out on a motorcycle ride, make sure that you have all the necessary safety gears and apparels in check so that you avoid hurting yourself when an accident occurs. You should not take a safety measure lightly because you will never know what will happen next. The next thing you might be doing is regretting why you missed out a simple safety precaution when you are on your way to the hospital nursing some wounds and possible fractures from an accident.

Author: Jenny Carson

About the author:
For more tips and information about women's harley davidson boots, please check out http://www.harley-davidson-boots.net.


Article source: Free Motorcycles Articles.



Read On 0 comments

How to Check Your Motorcycle before riding it

10:03 AM


Checking your motorcycle before you ride is very important for your safety. This will help you ensure that your motorcycle is in good condition. When your motorcycle is in top shape, you will less likely encounter an accident on the road.


Aside from wearing gears like leather motorcycle chaps, jackets, and helmets, checking your motorcycle before you leave can save your life. You have to monitor various parts every time. Keep in mind that if you fail to see that your brakes are loose or not working, you can end up crashing into another automobile or on the railings at the side of the road.


Knowing the how to check the various parts will make each of your trip safer. Here is a helpful guide to checking your motorcycle:


1. The Motorcycle Safety Foundation developed an acronym that you can use as a checklist when checking your motorcycle. This is the T-CLOCS. This stands for the tires, controls, lights, oils, chassis, and stands. The acronym is very useful. This will help you avoid missing anything when you are checking your motorcycle. You also have to remember that the T-CLOCS have sub parts that you need to look into as well.


2. The first on the list is tires. When checking the tires, make sure that it has the right level of air pressure. See to it that it is well inflated but not over the required rate. The tires are important because they are the objects that transport the entire machine. If the air is not the right amount, you will surely have difficulty balancing the bike.


3. The next items that you have to check are the controls. Most of the controls are on the handle. See to it that that the throttle, front brake, clutch, and the rest are working properly. You have to remember that there are also controls on the side of the motorcycle. Check those as well.


4. The next thing you have to check is the lights and other electrically controlled equipments in your motorcycle. All the lights should turn on when needed. You also have to see to it that the signals work when you use them. Try sounding the horn too. This is a very important device. It is the only way you can get the attention of the drivers and pedestrians who are not paying attention on the road.


5. Check the oil container and the rest of the fuel you need for the trip. You can check the gas by dipping the stick into the gas tank. Pour more gas if needed.


6. Check the frame or chassis of your bike as well. Include the other visible parts like the chain or belt.


7. Check the stands of your motorcycle too. You would not want your bike to lie on the ground because the kickstand is not working.


Before you wear your leather motorcycle chaps and the rest of your gears, check your bike properly first. This will ensure a smoother trip.

Author: Jenny Carson

About the author:
For more tips and information about leather motorcycle chaps, please check out http://www.outbackleather.com/motorcycle-chaps.


Article source: Free Motorcycles Articles.



Read On 0 comments

Five Top Causes of Motorcycle Accidents

6:40 AM


As much as it is fun to ride motorcycles, it is also very risky. From the moment you swing your foot over the machine, you are at risk. The motorcycle can fall on your foot leaving you injured. The riders take the risks seriously. They have to, since motorcycle accidents have claimed many lives.


Many would say that the people involved could have prevented the accidents if they had worn this and that. Riders should wear the right gears. This will protect them from accidents and reduce the injury they will incur. The gears can also help them perform better. The gauntlet motorcycle gloves for example allow the riders to have better and comfortable grip on the control. The jackets, on the other hand, warm them. This makes their drive more enduring.


There are many things that riders can do to prevent accidents. One is to check the motorcycle properly before hitting the road. They can deal with problem parts if they check the bike beforehand.


Even with all the safety gears and precautionary measures, accidents still happen. There are several causes of motorcycle accidents. Understanding the causes will help the riders realize what they have to do. Here are five of the top causes of motorcycle accidents:


1. Lack of visibility is the most common cause of accidents. It is difficult for other drivers to see motorcycles. Most only become aware of the presence of the motorcycles when they hit them. This is very dangerous because the rider can lose his balance and lose control over his bike. This can then lead to a crash.


2. Pushing the limitations of the motorcycles is another reason. Most new riders become too excited about speed. They ride in long distances even if they know little of the motorcycle they are riding. They do not understand the limitation of the machine. After a few kilometers, the parts give in and cause the bike to crash.


3. Over speeding is another cause of accidents. This is not only true to new drivers but to the old ones as well. Many riders ignore the speed limit for a particular road. Since fast bikes are difficult to maneuver, they are most likely to encounter accidents.


4. Many riders fail to check their motorcycles before using it. Thus, they fail to see the damaged in the bike. As a result, they were not able to repair or replace the part. Accidents can easily occur if there are some parts of the motorcycles that are not working properly. Although the rider can easily detect if there is something wrong, the damaged portion can lead to serious problems too.


5. Negligence is another cause of motorcycle accidents. Some riders refuse to give way to other motorist. There are also instances when the riders are not focusing on the road.


Gears such as the gauntlet motorcycle gloves can make your ride more comfortable. Other safety gears will make you feel secure. However, it is important that you acknowledge the danger involved when riding. This way, you will give it the respect it deserves.

Author: Jenny Carson

About the author:
For more tips and information about gauntlet motorcycle gloves, please check out http://www.outbackleather.com/classic-gauntlet-lined-gloves.html.


Article source: Free Motorcycles Articles.



Read On 0 comments

How Do the Motorcycle Controls Work?

12:39 PM


Many love to use motorcycles because they are cheaper. In addition, it allows the person to reach his destination faster. You can easily swerve the machine even in heavy traffics. The growing number of riders manifests the increasing appeal of the ride to many people.


Upon owning your very own bike, it is vital that you have the necessary gears to keep you safe and comfortable during the ride. You have to own a reliable pair of motorcycle riding gloves, boots, helmet, jacket, and motorcycle suits.


However, before you hit the road, you have to familiarize the different parts of the motorcycle. You need this to check them properly. The motorcycle safety foundation mandates that you check the T-CLOCS. This stands for tires, controls, lights, oils, chassis, and stands.


Before you can fully understand how to ride motorcycles, you have to get to know the different controls. Learning how to use them are essential for your ride. Almost all the motorcycle types have the same controls. You will see most of the controls around the handle.


Here are the controls you should familiarize:


1. The ignition switch is what starts the motorcycle. Other motorcycles utilize kick start. There are four possible statuses for your ignition switch. These are park, lock, on, and off. When placed in a lock position, you cannot move it unless a group of people carries it away.


2. Another important control is the clutch. You can operate it by squeezing the lever towards you. You will need the clutch when you want to change gears, slow down, or when you want to put the motorcycle on neutral. However, you will need to use your feet to choose your desired gear.


3. Brakes are necessary controls as well. Most motorcycles have two brake controls for a motorcycle. One is for the back wheel and another for the front wheel. The control for the front break is the lever at the right hand control. The control for the back brake on the other hand is at the right side of the motorcycle.


4. The throttle is also a very important control of your machine. It works like an accelerator. Riders use this to change speed. The throttle regulates the amount of air and gas that get into the carburetor.


5. There is also the electric starter. It is important that you learn how to use this. Make sure that the cut-out engine is on. After that, turn the ignition on. Next, pull the lever clutch in. The gear selector should be at neutral. Finally, press the starter button.


It is not enough that you have the best motorcycle gears available. The motorcycle riding gloves, boots, and other gears can make your ride safe and comfortable. However, you cannot start riding your motorcycle if you do not know how the various controls work. In order to know how to ride, it is important that you familiarize the different motorcycle parts. In addition, you also need to know how to use them properly.

Author: Jenny Carson

About the author:
For more tips and information about motorcycle riding gloves, please check out http://www.rockytopleather.com/categories/gloves.


Article source: Free Motorcycles Articles.



Read On 0 comments

Friendly blogs