Shifting gears is a very important command when motorcycling. It is necessary to change the speed of your motorcycle. Changing gears is not that easy though. However, a little practice will help you master it.

After preparing your motorcycle riding gloves and the rest of your gears, it is time to get to know your machine better. You have to know how to check your own motorcycle parts. Aside from learning how to check it, you have to know how to operate it as well. You will need to familiarize the different parts. This will make learning how to ride your motorcycle easier.

In order to learn how to shift gears, here are the steps you can follow:

1. Find out where the location of the shifter is. You will find it in the left side of the motorcycle. It is opposite to the foot brake of the bike. If you can find the lever for the clutch on the left handle, you will see the shifter on the foot peg at the left side.

2. Familiarize how many variations of gears your motorcycles have. Some have four or five. Others can have as much as six gears. You can change the gear by squeezing the clutch lever and clicking or choosing your desired gear. You can shift it to first, neutral, second and so forth.

3. Keep in mind that you cannot start your bike unless it is in neutral. Put your ignition on the start position. There are motorcycles that have electric start. The start button on these bikes is on the left handle. If your bikes do not have this, it has a kick start. Bikes with kick start provide a lever you can kick on the right side of your motorcycle next to your foot. You should not squeeze the clutch when starting.

4. After step three, it is time to turn your engine. Set your bike to move by squeezing the clutch and setting it to first gear. Hold down the clutch and do not release it. Slowly let it go as you give a small amount of gas to the motorcycle. Be patient with learning this. You cannot give it too much gas right away because you could lose control.

5. Once you have done this, study at what level will your motorcycle starts rolling. After getting to this level, give the bike more gas and let go of the clutch completely.

6. As you drive, remember to shift to second gear. You should not stay on the first gear for a long time. Again, this part takes a lot of practice. So take your time.

7. If you want to stop, shift to neutral or first gear as you are holding the clutch down.

Although the motorcycle riding gloves and the rest of the motorcycle gears are important to keep you safe, knowing how your machine works will definitely make everything run smoothly. However, you have to be patient. Familiarizing everything and mastering how to shift gear takes time.

Author: Jenny Carson

About the author:
For more tips and information about motorcycle riding gloves, please check out http://www.outbackleather.com/basic-riding-gloves.html.


Article source: Free Motorcycles Articles.