Many love to use motorcycles because they are cheaper. In addition, it allows the person to reach his destination faster. You can easily swerve the machine even in heavy traffics. The growing number of riders manifests the increasing appeal of the ride to many people.

Upon owning your very own bike, it is vital that you have the necessary gears to keep you safe and comfortable during the ride. You have to own a reliable pair of motorcycle riding gloves, boots, helmet, jacket, and motorcycle suits.

However, before you hit the road, you have to familiarize the different parts of the motorcycle. You need this to check them properly. The motorcycle safety foundation mandates that you check the T-CLOCS. This stands for tires, controls, lights, oils, chassis, and stands.

Before you can fully understand how to ride motorcycles, you have to get to know the different controls. Learning how to use them are essential for your ride. Almost all the motorcycle types have the same controls. You will see most of the controls around the handle.

Here are the controls you should familiarize:

1. The ignition switch is what starts the motorcycle. Other motorcycles utilize kick start. There are four possible statuses for your ignition switch. These are park, lock, on, and off. When placed in a lock position, you cannot move it unless a group of people carries it away.

2. Another important control is the clutch. You can operate it by squeezing the lever towards you. You will need the clutch when you want to change gears, slow down, or when you want to put the motorcycle on neutral. However, you will need to use your feet to choose your desired gear.

3. Brakes are necessary controls as well. Most motorcycles have two brake controls for a motorcycle. One is for the back wheel and another for the front wheel. The control for the front break is the lever at the right hand control. The control for the back brake on the other hand is at the right side of the motorcycle.

4. The throttle is also a very important control of your machine. It works like an accelerator. Riders use this to change speed. The throttle regulates the amount of air and gas that get into the carburetor.

5. There is also the electric starter. It is important that you learn how to use this. Make sure that the cut-out engine is on. After that, turn the ignition on. Next, pull the lever clutch in. The gear selector should be at neutral. Finally, press the starter button.

It is not enough that you have the best motorcycle gears available. The motorcycle riding gloves, boots, and other gears can make your ride safe and comfortable. However, you cannot start riding your motorcycle if you do not know how the various controls work. In order to know how to ride, it is important that you familiarize the different motorcycle parts. In addition, you also need to know how to use them properly.

Author: Jenny Carson

About the author:
For more tips and information about motorcycle riding gloves, please check out http://www.rockytopleather.com/categories/gloves.


Article source: Free Motorcycles Articles.